Voice messages, Log file – 2N BRI Lite/Enterprise v1.8 User Manual
Page 53
53
Voice Messages
This window is used for recording, checking and downloading voice
messages. Supported format is PCM–Alaw, Mono, 8000 Hz, 8 bits.
Index
Type of message
Use
Max. length(s)
0
DISA message
Inc. calls from GSM/UMTS
64
1
ME"Hallo"
Mobility Extension calls
4
2
ME"Mobility extension"
Mobility Extension calls
4
3
ME"Please dial number"
Mobility Extension calls
4
4
ME"Text message"
Mobility Extension calls
4
5
ME"Activated"
Mobility Extension calls
4
6
ME"Deactivated"
Mobility Extension calls
4
7
ME"beeep"
Mobility Extension calls
4
8
ME"be,be,be"
Mobility Extension calls
4
21
GSM outgoing group 1
Calls via Out. GSM group 1
8
22
GSM outgoing group 2
Calls via Out. GSM group 2
8
23
GSM outgoing group 3
Calls via Out. GSM group 3
8
24
GSM outgoing group 4
Calls via Out. GSM group 4
8
25
GSM outgoing group 5
Calls via Out. GSM group 5
8
26
GSM outgoing group 6
Calls via Out. GSM group 6
8
27
GSM outgoing group 7
Calls via Out. GSM group 7
8
28
GSM outgoing group 8
Calls via Out. GSM group 8
8
30
Message 30
Voice message detector
8
31
Message 31
Voice message detector
8
32
Message 32
Voice message detector
8
33
Message 33
Voice message detector
8
34
Message 34
Voice message detector
8
35
Message 35
Voice message detector
8
36
Message 36
Voice message detector
8
37
Message 37
Voice message detector
8
You can choose which message will be uploaded or use detection by file
name.
Detection
requires
file
name:
"mess[index
of
message][optional
remark].wav". You can upload more than one message in .tar file.
LOG file
The LOG file helps you read out the gateway LOG file. There are LOG file saving and
LOG listing updating icons in the lower part of the window.
Note
Voice messages with indexes 30 – 37 are used for detection of the mobile
provider's voice message played before call connection. If a match is
found of the voice message with any of the voice messages recorded in
the gateway, the call is terminated automatically or established via the
last GSM outgoing group set in the LCR table (on condition that the ITD –
Ignore tone detection in last group parameter is active) in the Gateway
section. Refer to the
Configuration
LCR table
/
Gateway
Configuration GSM basic parameters Voice message detector
/
/
for details.
settings