2N BRI Lite/Enterprise v1.8 User Manual
Page 68
68
GPRS activation
APN string – define the Access Point Name (APN) for GPRS connectivity.
Basic settings
Roaming enabled for network code – international code for the roaming enabled
network. The code consists of the following two numbers:
MCC – Mobile Country Code – national code (Czech Republic – 230, e.g.)
MNC – Mobile Network Code – GSM network code (T–Mobile 01, O202,
Vodafone 03, e.g.)
Hence, the T–Mobile CZ international code is 23001. Leave the field empty to disable
roaming.
String
Note
<empty>
Roaming disabled
2300
Roaming disabled (five digits at least)
23002
Roaming enabled for the 23002 (MCC+MNC) network
230XX
Roaming enabled for the 23000 – 23099 (MCC+MNC) network
XX001
Roaming enabled for the 00001 – 99001 (MCC+MNC) network
XXXXX
Roaming enabled for any network
CLIR – enable/disable presentation of the SIM CLI on the called party's
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.
Maximum number of called minutes – define the maximum count of minutes to
be called within a month via the selected SIM card.
SMS messages number – define the maximum count of SMS messages to be sent
within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on which
the
and
statistics shall
Max count of called minutes
Count of SMS messages
be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the
parameter.
Next count
Next count – set the length of one pulse in seconds after the time defined in the
Note
Before enabling roaming, please use your mobile phone to make sure that
the GSM/UMTS searching priorities have been set properly on the SIM
card.
Caution
Calls via a roaming network may increase your telephone call costs!
Caution
The
and
services
Temporary CLIP enable
Temporary CLIR enable
must be supported by the GSM/UMTS provider's network. Otherwise, the
call may be rejected by GSM/UMTS!