Barco SLM R12+ - Manual (Page 107)

8. Installation Mode
2. Press ENTER to select.
The following message will be displayed : “Convergence is reserved to qualified service personnel.”
WARNING
CONVERGENCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 8-22
8.8 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
•
front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the cursor key ↑ or ↓ to highlight Configuration.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-23
2. Press ENTER to select.
The configuration menu will be displayed.
For more information, see Installation Guidelines .
8.9 Lens Adjustment
What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
The following items can be adjusted:
•
zoom/focus
• shift
• Options : same zoom/focus for all files, yes or no.
R5976654 SLM R12+ 27/01/2005 103