Barco SLM R12+ - Manual (Page 145)

B. Built-In Dust Filters
Image B-8
Dust filter removal
How to clean
1. Clean the dust filter with a dry cloth or blow out with compressed air.
Reinsert the dust filters and put the cover back on its place by following the opposite procedure.
B.1.3 Dust filter on the bottom side
Necessary tools
No tools.
How to remove
1. Pull on both lips of the dust filter on the front side of the projector until the filter is completely removed.
Image B-9
Dust filter bottom side
How to clean
1. Clean the dust filter with a dry cloth or blow out with compressed air.
2. Reinsert the dust filter.
R5976654 SLM R12+ 27/01/2005 141