Barco SLM R12+ - Manual (Page 30)

3. Installation Guidelines
1
2
A
B
Image 3-20
Battery cover removal
2. Plug in the battery (9 V battery - type E-block or equivalent) onto the battery contact plate (A).
A B
Image 3-21
Battery connection
3. Place the battery into the lower compartment (B) (image 3-21).
4. Insert the pins of the battery cover (A) into the slots on the bottom of battery back cover and close the cover by pushing downwards
(B) until it clicks.
A
B
Image 3-22
Battery cover mount
5. A card, containing a button preset overview, can be inserted behind the plastic windowpane on the battery cover.
26 R5976654 SLM R12+ 27/01/2005