Barco SLM R12+ - Manual (Page 48)

4. Connections
To next COMM 800 Splitter
COM 800 Splitter 1 (R9827941)
Front
Slave 1
TO SWITCHER
COMM 800 Splitter
To Slave 2
To Slave 3
Custom Null Modem Cable
TO IR RECEIVER
Front
Slave 4
To Slave 5
To Slave 6
TO SWITCHER
COMM 800 Splitter
TO IR RECEIVER
Back
TO PROJ.1 TO PROJ.2 TO PROJ.3 TO PROJ.4
Back
TO PROJ.1 TO PROJ.2 TO PROJ.3 TO PROJ.4
COM 800 Splitter 2
Two Way
hardwired
remote
Hardwired
remote
Hardwired
remote
10(/100)BASE-T RS 232/422 IN RS 232/422 OUT COMM PORT
Read instructionsbefore
connecting periphals
Sync OK IR
Green operational
Red Stand-by
IR-Reciever Diagnostic Code
CTRL 3 CTRL 2
CTRL 1
Two Way
hardwired
remote
Hardwired
remote
Hardwired
remote
10(/100)BASE-T RS 232/422 IN RS 232/422 OUT COMM PORT
Read instructionsbefore
connecting periphals
Sync OK IR
Green operational
Red Stand-by
IR-Reciever Diagnostic Code
CTRL 3 CTRL 2
CTRL 1
Two Way
hardwired
remote
Hardwired
remote
Hardwired
remote
10(/100)BASE-T RS 232/422 IN RS 232/422 OUT COMM PORT
Read instructionsbefore
connecting periphals
Sync OK IR
Green operational
Red Stand-by
IR-Reciever Diagnostic Code
CTRL 3 CTRL 2
CTRL 1
Image 4-9
Com 800 Connection
3. Continue by connecting the slave projectors to the ’To Proj.’ connectors on the backside of the COM 800 Splitter (image 4-9).
4. When dealing with more than 4 slave projectors, the ’To Proj.’ connectors on the backside of the COM 800 Splitter can also be
used to connect extra COM 800 Splitters (image 4-9).
44 R5976654 SLM R12+ 27/01/2005