Barco SLM R12+ - Manual (Page 149)

B. Built-In Dust Filters
B
A
Image B-15
Removal metal fixation plate
2. Slide the metal fixation plate to the right until the screw head matches the free gap in the plate.
3. Remove metal fixation plate from rear cover.
4. Loosen the 3 hexagon socket screws (C) , securing metal fixation bar (D) to rear cover.
C
E
D
E
Image B-16
Removal metal fixation bar
5. Slide the metal fixation bar to the right until the screw head matches the free gap in the plate.
6. Remove metal fixation bar from rear cover.
Both air filters (E) can be removed for cleaning or replacement.
C
E
E
Image B-17
Air filter removal
How to clean!
1. Put the dirty air filter far away from the projector or preferable in another room.
R5976654 SLM R12+ 27/01/2005 145