Barco SLM R12+ - Manual (Page 117)

9. Service Mode
2. Press ENTER to display the Change password menu.
Note: Only possible when Owner.
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with ↑ or ↓
then <ENTER>
Reprogram with ↓ , ↑ , ← or →
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 9-9
3. Push the cursor key ↑ or ↓ to highlight Access Control List.
4. Press ENTER to display the Access Control List menu.
ACCESS CONTROL LIST
Menu O U G E
Adj mode Y Y Y Y
BARCO LOGO Y - - -
Change add Y Y - -
O=owner, U=user, G=Guest
E=everybody
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-10
For each item an access possibility can be set for owner, user, guest or everybody.
Changing an access possibility
1. Push the cursor key ↑ or ↓ to select an item in the scroll list.
2. Press ENTER to select.
3. Push the cursor key ← or → to select owner, user, guest or everybody.
4. Press ENTER to toggle between Y(yes) or N(no).
5. Repeat both steps if necessary.
Access Levels
An access level can be added to the following items:
•
Adjustment mode
• Barco logo
• Change projector address
• File delete
• File delete all
• Input balance
• Installation
• Random access
• Serial communication
• Service
R5976654 SLM R12+ 27/01/2005 113