Barco SLM R12+ - Manual (Page 115)

9. Service Mode
The different levels are:
•
owner
• user
• guest
Depending on your password level some password protected items are accessible and others not. The owner (which has the highest
level) can set up via the ’Access control list’ the accessibility of the different items. See ’Access Control List’.
Get access to the controller module
1. Power down the projector and disconnect the power cord from the wall outlet.
2. Loosen the indicate screws of the input box.
Image 9-1
Image 9-2
Access password switch
3. Pull out the input box by both handlers.
4. When a metal top cover of the box is mounted, remove first by turning out the screws.
Image 9-3
Metal top cover
5. When looking inside the box, the controller module with the switches is situated in the middle of the box.
Image 9-4
R5976654 SLM R12+ 27/01/2005 111