3 using hyperterm for the ascii protocol, 1 communication parameters, 2 settings for hyperterm – INFICON T-Guard Leak Detection Sensor Interface description User Manual
Page 22: Using hyperterm for the ascii protocol, Communication parameters, Settings for hyperterm, 3using hyperterm for the ascii protocol
Advertising
22
Using Hyperterm for the ASCII Protocol
jin
s
85
e1
3.f
m
In
ter
fa
c
e De
scrip
tion
(1
10
1)
3
Using Hyperterm for the ASCII Protocol
3.1
Communication Parameters
3.2
Settings for Hyperterm
This section describes which settings one should choose to talk to T-Guard™ Leak
Detection Sensor via Hyperterm. You can start Hyperterm in Windows by clicking:
Start
→ Run …
And typing:
hypertrm
and hitting the Enter key.
Data Format
Bits per second
19200 or 9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None
Fig. 3-2 Choose any name for the connection
Advertising