Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 101)

TM
Model 3000 M0188-01
Rev. 6/11 6-31
KPM II Monitor Operation
STEP 10 With the lower display showing “GNDSPD”,
connect the distance sensor. The monitor
will display “PICKUP” if a magnetic
distance sensor is connected or “RADAR”
if a radar distance sensor is installed. Only
one distance sensor can be connected at
a time.
NOTE: To connect the radar distance sensor,
install the 10" monitor/radar adapter between the
console and radar distance sensor to adapt the
monitor system to various tractor radar systems.
DO NOT CONNECT 10" MONITOR/RADAR
ADAPTER PRIOR TO THIS STEP.
STEP 9 (Continued)
12060215
NOTE: SMM console may not be applicable to
all models.
ON
AREA
OFF ExIT
ENTER
OK
CLEAR
SETUP
ROw
SPACING
TOTAL
AREA
UNITS
SPEED
VOLUME
SCAN
SEED
POPULATION
SEED
SPACING
FIELD
AREA
SPACING TOTAL
SEED
POP. FIELD
SELECT SPEED SCAN
SETUP
FRONT
®
SMM
SETUP FRONT
11 10 9 8 7 6 5 4 3 2 1 (12131415 16 17 18)
FLASHING
®
KPM II •