Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 89)

TM
Model 3000 M0188-01
Rev. 6/11 6-19
KPM II Monitor Operation
Lower LCD shows speed (MPH or KM/H) at power
up.
(MTR29g/MTR29b/MTR29a/MTR29c/MTR29f/MTR29c/MTR29f)
Press UP or DOWN arrow keys to
move flashing arrow on lower LCD
to change what is displayed.
Press the shortcut keys SPEED, SEED POPULATION/
SEED SPACING or AREA FIELD/TOTAL for direct
access to these displays.
(MTR29c/MTR29d/MTR29b/MTR29c)
Press SEED POPULATION/SEED SPACING or
AREA FIELD/TOTAL keys to alternate between the
two functions assigned to that key.
Press SEED POPULATION/SEED
SPACING key to choose average
seed spacing/population per acre.
Press SCAN key to display individual
rows starting at row 1.
Press SCAN key again to lock on
current row.
Press SCAN key again to resume
scrolling.
Use UP or DOWN arrow keys to
move to a particular row.
Press SEED POPULATION/SEED
SPACING key to go back to planter
average.
(MTR28e)
(MTR28c)
(MTR28c)
FIELD OPERATION
Press ON/OFF key to turn monitor on.
Information regarding each section is
displayed alternately every 5 seconds.
REAR/FRONT CONFIGURATION
(without SMM Console Installed)
• Press SELECT key once to show REAR
section only. (Monitor sets correct row
spacing.)
• Press SELECT key a second time to
return to each section being displayed
alternately every 5 seconds on KPM
II Stack-Mode console. (Monitor sets
correct row spacing.)
• Press SELECT key a third time to show
REAR section only.
REAR/FRONT CONFIGURATION
(with SMM Console Installed)
• Press SELECT key once to show
REAR section only on KPM II Stack-
Mode console. (Monitor sets correct
row spacing.)
• Press SELECT key a second time to
show FRONT section on SMM console
and REAR section on KPM II Stack-
Mode console. (Monitor sets correct
row spacing.)
• Press SELECT key a third time to show
REAR section only again.
FOUR SECTION CONFIGURATION
(with SMM Console Installed)
• Press SELECT key once to show
REAR and LEFT sections on KPM II
Stack-Mode console and REAR and
RIGHT sections on SMM console.
(Monitor sets correct row spacing.)
• Press SELECT key a second time to
return to all four sections, alternating
right front and right rear on SMM
console and alternating left front and
left rear on KPM II Stack-Mode console.
(Monitor sets correct row spacing.)
• Press SELECT key a third time to show
REAR and LEFT sections on KPM II
Stack-Mode console and REAR and
RIGHT sections on SMM console
again.
NOTE: SELECT key has no function when a single
section is used.
(MTR28c)