Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 103)

TM
Model 3000 M0188-01
Rev. 6/11 6-33
KPM II Monitor Operation
ROw-BY-ROw ALARM LEVEL SETTING
(Requires Version V2.05 Or Higher Software -
KPM II Stack-Mode Monitors Only)
This feature allows the audio alarm to be disabled on
selected rows in applications such as planting seed
corn.
NOTE: Program system to monitor all planter rows
before performing these steps.
STEP 1 Enter programming mode by pressing and
holding SETUP key. Monitor emits several
short beeps, followed by a long beep. On
the lower LCD, SETUP icon turns on and
arrow head icon flashes, indicating the user
can select an item to program.
NOTE: Monitor must be in a programmable
function (row spacing, unit, speed, volume or
area) to enter setup. Monitor will not enter setup
in seed population or seed spacing.
STEP 2 Press the UP or DOWN arrow keys to move
the flashing arrow to SEED POPULATION.
As the arrow icon moves, the lower LCD
will display the current setting of each item
selected.
12060218
NOTE: SMM console may not be applicable to
all models.
AREA
OK
CLEAR
ON
OFF ExIT
ENTER
SETUP
ROw
SPACING
TOTAL
AREA
UNITS
SPEED
VOLUME
SCAN
SEED
SPACING
FIELD
AREA
SPACING TOTAL
SEED
POP. FIELD
SELECT SPEED SCAN
SETUP REAR
12 11 10 9 8 7 6 5 4 3 2 1 (1314 15 1617 18)
ROw
SETUP
REAR
SEED
POPULATION
SMM
®
®
SETUP
2 1
FRONT
(12 11 10 9 8 7 6 5 4 3 13 14 15 1617 18)
120
110
100
90
80
70
60
%
120
110
100
90
80
70
60
%
KPM II •
NOTE: Illustrated using rear/front configuration.
The KPM II Stack-Mode console shows LEFT in
the left/right configuration, REAR in the rear/front
configuration and FRONT LEFT/REAR LEFT in
the four sections configuration. The SMM console
shows RIGHT in the left/right configuration, FRONT
in the rear/front configuration and FRONT RIGHT/
REAR RIGHT in four sections configuration.