Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 82)

M0188-01 Model 3000
6-12 Rev. 6/11
TM
KPM II Monitor Operation
STEP 4 To exit without saving, press and release
the OK key. The monitor restores the lower
LCD to show the item setting and the arrow
icon flashes, allowing the user to select
another item to program.
To exit and save, press and hold the OK
key. The monitor emits several short beeps
and SAVE? icon is turned on. After a short
time a long beep is heard, and the lower
LCD displays “DONE”. Release the OK
key. If the OK key is released BEFORE
“DONE” is displayed, changes WILL NOT
BE SAVED. “DONE” MUST be displayed in
order for the save to have occurred.
NOTE: Programming mode may be exited at any
time, by pressing the SETUP key. Pressing this
key returns the monitor to its normal operation.
All items changed and saved will come into effect
immediately. Any items changed, but not saved
will revert to the original programmed value.
PROGRAMMING - CHANGING AUDIBLE
ALARM VOLUME
STEP 1 To enter programming mode, press and
hold the SETUP key. The monitor emit s
several short beeps, followed by a long
beep. On the lower LCD, the SETUP icon
turns on and the arrow head icon will flash,
indicating that the user can select an item
to program.
NOTE: Monitor must be in a programmable
function (row spacing, units, speed, volume or
area) to enter setup. The monitor will not enter
setup in seed population or seed spacing.
STEP 2 Press UP or DOWN arrow keys to move the
flashing arrow to VOLUME. As the arrow
icon moves, the lower LCD displays the
current setting of the selected item.
STEP 3 Press the OK key and the flashing arrow
becomes solid and the audible alarm will
sound.
NOTE: The lower LCD displays the current volume
and the SPEAKER icon is turned on. Settings are
from 0 to 9.
•Use UP or DOWN arrow keys to change
the setting. With every UP arrow key
push, the alarm will increment by one step
between the minimum and the maximum.
If the maximum level (9) is reached the
volume rolls over to the minimum level (0).
•Pressing the DOWN arrow key lowers
the volume until the minimum level (0) is
reached, at which point the volume rolls
over to the maximum level (9).