Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 140)

M0188-01 Model 3000
7-10 Rev. 6/11
TM
Lubrication and Maintenance
TIRE PRESSURE
wARNING
Explosive separation of rim and tire parts can result in death
or serious injury. Overinflation, rim and tire servicing, improper
use of rims and tires, worn, or improperly maintained tires could
result in a tire explosion and separation of tire and rim.
To prevent tire explosion:
• Maintain proper tire pressure. Inflating a tire above or below the recommended
pressure can cause tire damage.
• Mount tires only by properly trained personnel using proper equipment.
• Replace any tire with cuts or bubbles. Replace any damaged rims. Replace
missing lug bolts and nuts.
• Do not weld or heat wheel assembly. Heating increases tire pressure.
Transport/ground drive - 7.50" x 20" . . . . . . . . Inflate to 40 psi (275.7 kPa)
Contact drive - 4.10" x 6" . . . . . . . . . . . . . . . . Inflate to 50 psi (344.7 kPa)
MODEL 3000 OPERATING TIRE PRESSURE
Contact drive
Transport/ground drive