Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 90)

M0188-01 Model 3000
6-20 Rev. 6/11
TM
KPM II Monitor Operation
CLEARING FIELD AREA
(MTR29n/MTR28b)
To reset the counter, press the UP or
DOWN arrow keys to move the arrow
in the lower display to FIELD AREA.
Press UP and DOWN arrow keys at
the same time and hold them down
for a short period of time to clear data.
The CLEAR? icon displays and the
monitor beeps several times. When
data is actually cleared, the monitor
emits a long beep and the field area
is reset to zero. After the long beep,
the previous field area recorded is
not retrievable.
NOTE: Clearing the field area counter will not
clear the total area counter. See “Programming-
Clearing Total Area” for clearing total area.
Press the OK key to silence alarms. See
“Warnings And Alarms”.