Kinze 3000 Rigid Frame Planter Rev. 6/14 - Manual (Page 80)

M0188-01 Model 3000
6-10 Rev. 6/11
TM
KPM II Monitor Operation
LOwER LCD FUNCTIONS
(MTR29g)
• UP and DOWN arrow keys sequentially change
what is displayed on the lower LCD. Pressing UP
or DOWN arrow keys move the arrow head icon
(on the left and right hand side of the display) to
another item. For example, if the arrow icon is
pointing to SPEED, ground speed is displayed on
the LCD. Pressing the UP arrow key moves the
icon to UNITS. The display changes to display all
icons used to represent the current (English or
Metric) measurement system.
• The shortcut keys SPEED, SEED POPULATION/
SPACING and AREA FIELD/TOTAL allow direct
access to their respective displays. For example,
no matter what is currently being displayed on
the lower LCD, pressing the SPEED key will
change the display to the current speed. Pressing
the SEED POPULATION/SPACING or AREA
FIELD/TOTAL keys will alternate between the two
functions assigned to those keys.
• Pressing the SCAN key while displaying seed
spacing or population causes a sequential display
of each individual row. Pressing the SCAN key a
second time freezes the display on the currently
displayed row. UP or DOWN arrow keys can
be used to change the currently displayed row.
Pressing the SCAN key restarts automatic
advancing of the scan function.
• Pressing the SCAN key while displaying speed
causes a sequential display of speed, average
planter population, and average seed spacing.
Pressing the SCAN key a second time freezes
the display on the currently displayed reading.
ROw SPACING
Press the arrow keys to ROW SPACING to display
the current spacing between rows in inches or
centimeters. The ROW SPACING icons turn on,
displaying a 3 digit, one decimal place format. In the
area count mode, this function displays the implement
width in feet or meters, using a 3 digit, no decimal
places format.
UNITS
Press the arrow keys to UNITS to display all the
icons from the currently selected English or Metric
measurement system. For the English system, the
icons are: INCH, MPH, FT, ACRE and MILE. For the
Metric system, the icons are: CM, KM/H and Ha.
SPEED
Press the SPEED key to display the current speed
in MPH or KM/H, using a 3 digit, one decimal place
format.
VOLUME
Press the arrow keys to VOLUME to display the
presently selected audible alarm volume. The
SPEAKER icon turns on.
SCAN
Press the SCAN key to display the seed spacing or
seed population (see Steps 1-3 following) of each
individual row. (1)Pressing the SCAN key while
displaying any other function will cause the monitor to
sequentially display speed, average seed population
and average seed spacing. (2)Pressing the SCAN
key a second time will freeze the display. (3)Pressing
the SCAN key a third time restarts the sequential
display. The UP and DOWN arrow keys can be used
to change the current display.