Leica Biosystems IPS - Manual (Page 58)

56 Instructions for Use V 1.9 RevD - 05/2013
6. Cleaning and Maintenance
• Push a (new) cleaning cartridge as far as it
will go into the shaft ( Fig. 58 ).
• Unscrew the red cap (85) one turn and slide
the cartridge fully home.
• Push the security latch (86, Fig. 57 ) back in
front of the cartridge.
+
Instructions for storage (continued)
Fig. 59
72
69
Fig. 58
• Push the small lever (69, Fig. 59 ) upwards
under the print head.
64
85
• Open the hood of the printer
(4 in Fig. 31 ), then press the
CLEAN and LOADED keys simul-
taneously.
• The print head (72) moves up-
ward to a position approx. 1 cm
( 1 /
2
inch) away from the sealing
lip ( Fig. 59 ).
• The "Ink Empty" LED will go out and "88" will
appear on the display.
• Press CLEAN to rinse the print head; "00" will
appear on the display. The display will go out
when the cleaning process is complete.
The cleaning process with solvent
takes approx. 3.5 minutes.
р
р