Leica Biosystems IPS - Manual (Page 67)

65 Leica IP S
7. Troubleshooting
7.6 Replacing the fuses
Replacing the fuses
91
90
• Insert a screwdriver (91) into the slot in fuse
holder (90); push slightly inwards and at the
same time rotate the screwdriver 1/4 turn to
the left.
• The fuse holder is released and can be
removed.
90
92
• Remove the defective fuse (92) from the fuse
holder (90) and insert the correct type replace-
ment fuse.
• Reinsert the fuse holder together with the fuse.
Insert the screwdriver into the slot in the fuse
holder, push slightly inwards and at the same
time rotate the fuse holder 1/4 turn to the right.
Fig. 65
Fig. 66
Before replacing a fuse, always switch the instrument off and unplug from power supply.
Defective fuses may be replaced only with the replacement fuses supplied together with the
instrument.