Lenze ETCxxxxx User Manual
Page 20
Device description
Control in top hat rail design (ETCHx)
3.2
l
20
EDSTCXX EN 2.0
4 MByte static SRAM (32 Bit RAM) and 2 MB Flash PROM are available.
ETCHC: The firmware has a memory requirement of 1 ... 1.5 MB SRAM and
1 MB Flash PROM. This means that the user has 2.5 ... 3 MB SRAM and 1 MB
Flash PROM available. This is sufficient for e.g. typically 128 NC sentences
(preprocessing buffer), 512 kB PLC program, 128 kB PLC data and 1 MB SPV
memory (DIN program memory).
ETCHM: The firmware has a memory requirement of 1 MB SRAM and 1 MB
Flash PROM. This means that the user has 3 MB SRAM and 1 MB Flash PROM
available. Verfügung. This is sufficient for e.g. typically 2000 kB PLC program
and 1000 kB PLC data.
The memory allocation can be configured by the user.
Organisation of memory