Lenze ETCxxxxx - Manual (Page 35)

Device description
Module
Bus termination module
3
3.4
3.4.2
l
35 EDSTCXX EN 2.0
3.4.2 Bus termination module
The module ETCHT000 is used as a bus terminator for the internal CAN bus
or as a transfer module for a multiline system structure.
CAN terminator module: DIP switch 1 = ON
CAN transfer module: DIP switch 1 = Off
9 ... 11
13 ... 15
S1, S2
ME
ETC011
Terminal Designation Signal Comment
9 C_H CAN High To extend the ME bus
to external modules
10 C_L CAN Low
11 C_Gd CAN signal earth
13 ... 15 CAN shield potential, shielding Terminals bridged
internally
S1 Switch for CAN bus termination On = termination with
120 Ohm between C_H
and C_L
S2 Without function
ME ME bus
Description
Elements