Lenze EMZ9374IB - Manual (Page 48)

Product description
Function
3
l
48 EDBMZ9374X DE/EN/FR 4.2
3 Product description
3.1 Function
The EMZ9374IB Terminal Extension is used to extend digital input and output
terminals of Lenze controllers. Die Klemmen I/O1 I/O8 können wahlweise als
Eingang oder Ausgang programmiert werden. Terminal extensions and
controller communicate via system bus (CAN).
Up to 4 terminal extensions can be called via one address.
The configuration of the terminal extension can be either inside the controller
using DIP switches or conveniently via codes using Global Drive Control (GDC).
3.2 Application as directed
The terminal extension is an accessory that can be used with the following
standard Lenze devices:
ƒ Servo inverter of the 9300 series
ƒ 9300 vector control
ƒ Servo PLC 9300
ƒ Drive PLC
ƒ Frequency inverter 8200 vector
ƒ Frequency inverter 8200 motec
Any other use shall be deemed inappropriate!
3.3 Scope of supply
Packing list Important
l 1 terminal extension EMZ9374IB
l 1 book of Operating Instructions
l 2 bus terminating resistors (120 W)
l 1 12−pin terminal board for the connection
of the inputs/outputs and to the DC power
supply
l 1 3−pin terminal board for the connection to
system bus (CAN)
After receipt of the delivery, check immediately
whether the items delivered match the
accompanying papers.Lenze does not accept
any liability for deficiencies claimed
subsequently.
Claim
l visible transport damage immediately to the
forwarder.
l visible deficiencies/incompleteness
immediately to your Lenze representative.