Lenze DSD - Manual (Page 11)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
11
1 Notes on usage
1.1 Licencing and contractual conditions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 Notes on usage
1.1 Licencing and contractual conditions
The use of the »Drive Solution Designer« is only permitted if the user accepts the licencing and con-
tractual conditions in the currently valid version.
• The valid version of the licencing and contractual conditions can be found under
http://www.Lenze.com
1.2 Terms and conditions
For deliveries and counselling services the respective valid terms and conditions of the Lenze group
apply.
• The valid terms and conditions can be found under
http://www.Lenze.com
1.3 Important information on the program
The »Drive Solution Designer« supports you on the basis of Lenze products, in order to find a correct
and feasible solution for a drive task.
• For this purpose, a knowledge base with inverters, motors, gearboxes, electrical brake units, me-
chanical brakes, and feedback systems is stored in the »Drive Solution Designer«, which is used
for the calculation of the drive solution.
• The »Drive Solution Designer« not only calculates the physical connections by means of formu-
las, but filters suggested solutions from the knowledge base according to different criteria.

Note!
The product-specific data of drive components contained in this documentation are not
subject to a regular revision service!
In case of doubt, the information in the current product documentation (catalogues, Op-
erating Instructions, System Manuals, etc.) available in printed form and via the internet
is valid!