Lenze DSD - Manual (Page 245)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
245
8 Motion design
8.2 MotionDesigner
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Combining elements
A self-created trapezoidal element consisting of S-shaped or line elements can be combined for easy
handling. At least tow and maximally five elements can be combined. A combined element is seen
as one element in the MotionDesigner.

How to combine several elements:
1. Select each element using the mouse while keeping the Shift key pressed.
2. Click the icon in the toolbar.
• The selected elements are combined.
Click the icon in the toolbar to undo the combination again.

Tip!
A predefined trapezoidal element in the MotionDesigner consists of combined elements.
The combination can be undone as well.