Lenze DSD - Manual (Page 244)

8 Motion design
8.2 MotionDesigner
244
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Shift elements automatically to the left
With one command, all elements on the drawing area can be quickly connected to a motion profile.
Automatic connections are ignored and removed. The elements do not need to be selected for this
action.

How to shift all elements automatically to the left:
1. Click the icon in the toolbar.
• Each element is shifted towards its left adjacent element and connected to it if a reason-
able connection is possible.
• The position of an element is defined by its center. An element is shifted if its center is
positioned to the right of its adjacent element.
• Line elements and S-shaped elements are also shifted on the Y axis if a sensible connec-
tion is possible.
• The first element is not shifted.