Lenze DSD - Manual (Page 341)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
341
11 Drive Dimensioning
11.4 Lenze gearbox selection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.4.6 Selection table
The gearbox selection table represents the parameters of the selected gearboxes, preview values,
and some important parameters of the complete system.
• A basic description of the selection table and tools for a quick selection of suitable components
can be found here:
 Structure of the selection tables ( 34)
 Sorting and filtering results in selection tables ( 35)
Description
 Torque-speed characteristic of the motor.
Measured or simulated limit characteristic of the motor.
Alternative for the characteristic curve of the motor.
• Not for all motors measured or simulated characteristics are available.
S1 characteristic of the motor.
• Vertical characteristic: rated motor speed.
Torque-speed characteristic of the application requirement.