Lenze DSD - Manual (Page 414)

16 Auxiliary means
16.1 Auxiliary means integrated in the DSD
414
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16.1.1.7 "Mass of rope/cable (hoist drive)" calculator

How to call the calculator:
• Via the ToolsSpecial auxiliary calculatorsMass of rope/cable (hoist drive)... com-
mand
• Via the icon in the input area.
Button Function
= Calculate result.
Close Close dialog box.
• Only available if the calculator is called via the menu bar.
Accept Accept calculated value for the parameter and close dialog box.
• Only available if the calculator is called via the input area.
Cancel Discard calculated value and close dialog box.
• Only available if the calculator is called via the input area.
Input field Meaning
Cable density Input parameters for the calculation
Cable length
Cable diameter