Lenze DSD - Manual (Page 478)

18 Drive dimensioning messages
18.10 Supply module
478
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.10.9 Utilisation of the power supply module is >100 %
Warning!
The utilisation of the power supply module relating to the pulse power in the DC bus is xxx %. Thus, the
limit value of 100 % is exceeded.
Cause Effects Possible remedies
The power supply module is actuated
in overload operation for too long.
Operation is not permissible. The de-
vice is overloaded.
• Select larger power supply mod-
ule.
• Connect several power supply
modules in parallel.
• Observe notes in the documen-
tation of the power supply
module.