SATEC EM720 Operation Manual - Manual (Page 102)

Chapter 5 Configuring the EM720
Configuring Recorders
102 EM720 Power Quality and Revenue Meter
2. Select a partition type for your file.
3. Select the number of parameters you want to be
recorded in the file records.
4. Select the maximum number of records you want to be
recorded in the file.
5. Click OK, and then send your new setup to the meter,
or save to the device database.
To define the contents of the file:
1. Highlight the data log file row with the left mouse
button, and then click on the “Setup Recorder” button,
or click on the “Data Recorder” tab and select the
corresponding log number.
2. Configure the list of parameters to be recorded in a log
file. You are not allowed to select more parameters
than you defined when configuring your file. Refer to
Appendix A for a list of available parameters.