Device options and mode control, In chapter 5 on how to, In chapter – SATEC EM720 Operation Manual User Manual
Page 70: In chapter 5), Device options and mode, Control, On how to enable and disable compensation in, In chapter 5 on how to enter the meter test mode
Chapter 5 Configuring the EM720
General Meter Setup
70
EM720 Power Quality and Revenue Meter
Device Options and Mode Control
Using the Front Display
To enter the common options setup menu, select Options
from the main menu.
To enter the TEST mode options setup, select Test from the
main menu. You can also use an extended press on the
SCROLL + SELECT/ENTER buttons from the clock display as a
shortcut for immediate entering the TEST mode setup.
See
Viewing and Changing Setup Options
information on navigating in menus.
See the table below for available options.
Using PAS
Select General Setup from the Meter Setup menu, and then
click on the Device Options tab.
NOTE
Test Mode options and other device options have different
security levels. You may not be allowed to change the device
options if the user password you provided does not have
required permissions.
The following table lists available device options.