SATEC EM720 Operation Manual - Manual (Page 47)

Chapter 3 Using Front Display
Programming Mode
EM720 Power Quality and Revenue Meter 47
Once you entered a submenu, the left window is still showing
the menu name, while the upper-right window represent a
submenu options list, and the lower-right window indicates
the present option value.
To select an option you want to view or change:
Use the SCROLL button to scroll through the option list until
the desired option’s name appears in the window.
To change the selected option’s value:
1. Press the SELECT/ENTER button briefly to highlight the
lower-right window.
2. If an option is represented by a list of values, use the
SCROLL button to scroll through the list until a desired
value appears in the window. It an option is
represented by a numeric value, use the SCROLL
button to adjust each digit to the desired value, and
use a short press on the SELECT/ENTER button to
move through digits.
3. Once the desired value is selected, press the
SELECT/ENTER button for more than 1 second to save
your new setting. You return to the upper-right
window and can continue scrolling through the rest of
options or can return to the main menu.
If you wish to leave the option value unchanged, use a short
press on the SELECT/ENTER button to return to the upper-
right window.
To exit the submenu and return to the main menu:
1. If the upper-right window is not highlighted yet,
highlight it by briefly pressing the SELECT/ENTER
button.
2. Press the SELECT/ENTER button for more than 1
second. You will return to the main menu.
To exit the main menu and return to the data display:
1. Press briefly the SELECT/ENTER button to highlight the
right-upper Exit window.
2. Press the SELECT/ENTER button for more than 1
second. You will return back to the data display.
LONG PRESS ENTER
SCROLL
SHORT PRESS SELECT
LONG PRESS ENTER
LONG PRESS ENTER
SCROLL
LONG PRESS ENTER
SHORT PRESS SELECT
LONG PRESS ENTER