Multi-point lock quick tip sheet & instructions – Therma-Tru Doors Installation User Manual
Page 24
![background image](/manuals/574353/24/background.png)
Installation
1.24
2014
SITE 1
Multi-Point Lock
Quick Tip Sheet & Instructions
HARDWARE MODIFICATION
INSTRUCTION SHEET
SHIPPING CLIP FOR
MISHANDLING DEVICE
1. Remove sticker.
2. Remove shipping clip.
3. Make sure mishandling
device is sloped to engage
strike plate.
4. If not, pull out and spin
180 degrees.
REVERSING LATCH IS LATCH
IS BACKWARDS.
1. Pull out latch until latch
clears lockcase.
2. Rotate latch 180 degrees
and release back into lockcase.
REM
OVE
CL
IP
BE
FO
REU
SE
Pull
REMOVABLE
STICKER
SHIPPING CLIP
SOCKET STRIKE INSTALLATION
1. Mark hole location using tip
of shootbolts as guides.
2. Drill 9/16” hole at marks
through jamb and sill.
3. Insert Socket Strike Cup
into 9/16” holes at head
jamb and sill.
NOTE: Door WILL NOT
lock unless bolts are fully
extended.
SOCKET
STRIKE
CUP
Do not remove torx screws under any circumstances.
They are not a field serviceable item.
CAUTION:
June 2009 Part# BMTTMPLQT