Transom installation instructions, Install transom grille (optional) – Therma-Tru Doors Installation User Manual
Page 53
Installation
SITE 1
2014
1.53
Transom Installation Instructions
13
INSTALL TRANSOM GRILLE (OPTIONAL)
Use table below for location of grille bars.
Mark transom head in same manner.
"A"
"B"
"C"
"D"
UNIT SIZE
6/0
5/4
5/0
5/8
14-23/32”
13-29/32”
13-7/64”
12-5/16"
29-11/32”
27-3/4”
26-9/64”
24-35/64”
43-31/32”
41-9/16”
39-11/64”
36-49/64”
"A"
"B"
"C"
"D"
58-19/32”
55-25/64”
52-13/64”
49”
GRILLE BAR LOCATIONS, 5-PANE TRANSOM
"A"
"B"
"C"
UNIT SIZE
6/0
5/4
5/0
5/8
18-3/8”
17-3/8”
16-3/8”
15-3/8”
36-21/32”
34-21 32”
32-21/32”
30-21/32”
54-15/16”
51-15/16”
48-15/16”
45-15/16”
"A"
"B"
"C"
GRILLE BAR LOCATIONS, 4-PANE TRANSOM
Removable/replaceable grille is standard in elliptical
(clear) transoms and is factory installed.
"A"
"B"
UNIT SIZE
3/0
12-5/64”
24-3/64”
"A"
"B"
GRILLE BAR LOCATIONS, 3-PANE TRANSOM
Measure from inside edge of transom jamb and place a mark on the sill approximately 3/4”
from inside edge of sill.