Screen installation, French door hinged screen installation – Therma-Tru Doors Installation User Manual

Page 73

Advertising
background image

Installation

SITE 1

2014

1.73

Screen Installation

Position the right or left door panel into the frame.

Be sure the side hinged channel aligns properly with the

head jamb miter.

Using a 1/8” drill bit, pre-drill a hole into the side

brickmould using the pre-punched hole in the aluminum

channel as a guide.

Fasten side jamb channel to side brickmould using #8 x 1”

stainless steel screws and check for proper alignment

Repeat for remaining door panel.

1

1750 Indian Wood Circle Maumee, OH 43537

1-800-THERMATRU (843-7628)

www.thermatru.com

Left hinge door

panel side jamb

and bottom

expander

attached

Right hinge door

panel side jamb

and bottom

expander

attached

Astragal

Head Channel

Door Handle Package

Spring Latch (2)

20 - 1” Stainless Steel Screws

4 - 3/4” Stainless Steel Screws

Place head channel at the top of the door opening on the

exterior side, centering it between the right and left side

jambs.

Using a 1/8” drill bit, pre-drill a hole in the head brickmould

using the pre-punched holes in the aluminum channel as

a guide.

Fasten head channel to head brickmould using #8 x 1”

stainless steel screws.

Trim the black rubber door sweep even with the adjustable

bottom expander. Crimp the ends of the slot with pliers

to prevent the sweep from sliding out.

3

Install the handle hardware on the active door .

CAUTION: BE SURE TO POSITION THE SCREEN

DOOR HANDLE SO THAT IT DOES NOT INTERFERE

WITH THE OPERATION OF THE HANDLE SET

ON THE PRIMARY DOOR.

At desired height, fold self-

adhesive template to door.

Mark center of the three

holes on both sides

Using a 5/16” drill bit,

bore the three holes 1/2

way through on both sides.

Note: Ream out center hole by inserting drill and rotating

with a slight wobbling action to clear hole and allow

complete freedom of action for spindle.

SPINDLE MUST BE FREE.

4

French Door Hinged Screen Installation

2

© 2005 Therma-Tru Corp.

Therma-Tru Doors is an operating company of Fortune Brands, Inc.
Part # DDSINSTALL

1/1/05

French Door Hinged Screen Materials Supplied

Bottom of Door

Crimp Here

Advertising