Therma-Tru Doors Installation - Manual (Page 32)

Installation
1.32 2014 SITE 1
Paintable & Stainable Astragal
Site Installation Instructions
4
Position brass keeper plate as shown at
overhead hole.
Fasten plate with (2) #6 x 1” screws.
5
INSTALL KEEPER PLATE.
Astragal Keeper Plate
with
#6 x 1” screws
INSTALL LONG HINGE SCREWS
(SITE ONLY).
With door open,
at hinges where
labels indicate,
drill 1/8” dia.
pilot holes
and drive
#10 x 2-1/2”
screws through
hinges to anchor
door frame and
prevent sagging.
#10 x 2-1/2”
screws
(2)
(1)
(1)
3 INSERT ASTRAGAL FILL PLUG INTO
THRESHOLD.
Fit should be tight, sealant will
act as adhesive.
Fill Plug