Therma-Tru Doors Installation - Manual (Page 71)

Installation
SITE 1 2014 1.71
Remove existing screen track.
Insert wheels of top hung adapter into top hung track as
shown.
Position track up into screen channel. Drill 1/16” pilot holes
thru holes in track into head jamb approximately 1/4” deep.
Insert screen into adapter channel and rotate down
engaging wheels in bottom of screen with track on sill.
Fasten track to head jamb with #4 x 1/2” flat head screws.
Align adapter with edge of screen.
Drill 1/8” holes thru hole locations in adapter into screen
from interior of unit.
Fasten with #10 x 1/2” screws.
Close screen door and locate position of latch. Mark hole
locations for latch. Drill 1/16” pilot holes into side jamb.
Fasten with (2) #6 x 5/8” pan head screws.
“Wide Profile” Screen Installation - Hinged Patio
1
6
7
8
2
3
5
4
#10 x 1/2”
pan head screw
#4 x 1/2”
pan head screw
#6 x 5/8”
pan head screw
Adapter Track Latch
Screen
1750 Indian Wood Circle Maumee, OH 43537
1-800-THERMATRU (843-7628)
www.thermatru.com
© 2005 Therma-Tru Corp.
Therma-Tru Doors is an operating company of Fortune Brands, Inc.
Part # THSINSTALL 4/1/05
Screen Installation