Therma-Tru Doors Installation - Manual (Page 39)

Installation
SITE 1 2014 1.39
Multi-Point Shootbolt
Coastal Astragal 2 Installation Instructions
®
The Most Preferred Brand in the Business
Site
Installation
Instructions
for
Multi-Point
Shootbolt
Coastal
Astragal 2
The following instructions should be completed
at the unit installation site.
The hardware pack contains all the necessary
hardware and fasteners needed to complete the
installation of the astragal unit.
Read all instructions before starting.
1 APPLY SEALANT AND MARK SLIDE
BOLT ENDS.
Extend slide bolts and place sealant on each tip.
Sealant will be used to mark hole locations.
Retract bolt.
With inactive door held in closed position, and
door flush with frame, extend slide bolts to mark
head and sill.
Retract bolts.
P/N: CA2MPLSSITE Rev. A 3/8/06