Rockwell Automation 20-COMM-B BACnet MS/TP Adapter - Manual (Page 22)

2-6 Installing the Adapter
1. Remove power from the drive.
2. Use static control precautions, and remove or open the drive cover.
3. Connect the Internal Interface cable to the DPI port on the drive and
then to the DPI connector on the adapter.
Figure 2.5 DPI Ports and Internal Interface Cables
Connecting the Adapter to the Drive
➌
20-COMM-B Adapter
PowerFlex 70 Drive
➋
➊
PowerFlex 700 Drive
Frames 0 - 1
PowerFlex 700 Drive
Frames 2 and Larger
➍
Item Description Item Description
➊
15.24 cm (6 in.) Internal Interface cable
➌
RS-485 serial cable connection
➋
DPI Connector
➍
2.54 cm (1 in.) Internal Interface cable