Rockwell Automation 20-COMM-B BACnet MS/TP Adapter - Manual (Page 29)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix B , Adapter Parameters . For
definitions of terms in this chapter, refer to the Glossary .
The adapter stores parameters and other information in its own
Non-Volatile Storage (NVS) memory. You must, therefore, access the
adapter to view and edit its parameters. The following tools can be used
to access the adapter parameters:
Topic Page
Configuration Tools 3-1
Using the PowerFlex 7-Class HIM 3-2
Setting the Device Instance Number 3-3
Setting a Comm Loss Action 3-5
Setting the Comm Loss Time 3-6
Setting the Baud Rate 3-7
Resetting the Adapter 3-7
Viewing the Adapter Configuration 3-8
Configuration Tools
Tool Refer to…
PowerFlex 7-Class HIM
(20-HIM-*) page 3-2
DriveExplorer Software
(version 3.xx or higher) http://www.ab.com/drives/driveexplorer, or
DriveExplorer online help (installed with the software)
DriveExecutive Software
(version 3.xx or higher) http://www.ab.com/drives/drivetools, or
DriveExecutive Online help (installed with the software)