Basic display group, Continued), B024 [drive temp – Rockwell Automation 22D PowerFlex 40P User Manual, FRN 3 User Manual
Page 54: B025 [counter status, B026 [timer status, B028 [stp logic status, B029 [torque current
3-8
Programming and Parameters
Basic Display Group
(continued)
b024 [Drive Temp]
Present operating temperature of the drive power section.
Values
Default:
Read Only
Min/Max:
0/120 degC
Display:
1 degC
b025 [Counter Status]
The current value of the counter when counter is enabled.
Values
Default:
Read only
Min/Max:
0/9999
Display:
1
b026 [Timer Status]
32 bit parameter.
The current value of the timer when timer is enabled.
Values
Default:
Read Only
Min/Max:
0.0/9999 Secs
Display:
0.1 Secs
32
b028 [Stp Logic Status]
[Speed Reference] is set to 6 “Stp Logic” or 9 “Positioning”, this parameter will display the
current step of the Step Logic profile as defined by parameters
-
[Stp Logic x].
Values
Default:
Read Only
Min/Max:
0/8
Display:
1
b029 [Torque Current]
The current value of the motor torque current.
Values
Default:
Read Only
Min/Max:
0.00/(Drive Rated Amps
×
2)
Display:
0.01 Amps