A107, A109, Advanced program group – Rockwell Automation 22D PowerFlex 40P User Manual, FRN 3 User Manual
Page 81: Continued), A107 [comm format, A108 [language, A109 [anlg out setpt
Programming and Parameters
3-35
Advanced Program Group
(continued)
A107 [Comm Format]
Related Parameter(s):
Selects the protocol (RTU only), data bits (8 data bits only), parity (None, Even, Odd), and stop bits (1
stop bit only) used by the RS485 port on the drive.
Refer to
for details on using the drive communication features.
Important: Power to drive must be cycled before any changes will affect drive operation.
Options
0 “RTU 8-N-1” (Default)
1 “RTU 8-E-1”
2 “RTU 8-O-1”
3 “RTU 8-N-2”
4 “RTU 8-E-2”
5 “RTU 8-O-2”
A108 [Language]
Selects the language displayed by the remote communications option.
Options
1 “English” (Default)
2 “Français”
3 “Español”
4 “Italiano”
5 “Deutsch”
6 “Reserved”
7 “Português”
8 “Reserved”
9 “Reserved”
10 “Nederlands”
A109 [Anlg Out Setpt]
Related Parameter(s):
[Analog Out Sel] is set to option 18, 19 or 20, this parameter sets the percentage of
analog output desired.
Values
Default:
0.0%
Min/Max:
0.0/100.0%
Display:
0.1%