Rockwell Automation LPM20 Liquid-Cooled AC Drive with High Performance Drive Control - Manual (Page 19)

Installation/Wiring 1-7
DPI Communication Port
The Communication Interface PCB contains an eight-position, female,
locking mini-DIN connector that is used as a DPI communication port. This
port (DPI Port 4 shown in
Figure 1.4 below) provides communication
between the LPM20 drive and another DPI device (for example, a HIM).
Figure 1.4 DPI Communication Interface Board
For more information regarding operating LPM20 drives with a HIM, refer
to
Appendix B .
Determining Total Area Required Based on Drive Dimensions
Overall drive dimensions are illustrated in Figure 1.5 and Figure 1.6 as an
aid in calculating the total area required by the LPM20 drives.
DPI
Port 3
DPI
Port 4
DPI
Port 5