Removing/installing the him – Rockwell Automation LPM20 Liquid-Cooled AC Drive with High Performance Drive Control User Manual
Page 74
Advertising
B-6
HIM Overview
Removing/Installing the HIM
The HIM can be removed or installed while the drive is powered.
Important: HIM removal is only permissible in Auto mode. If the HIM is
removed while in Manual mode or the HIM is the only
remaining control device, a fault will occur.
Step
Key(s)
Example Displays
To remove the HIM
…
1. Press ALT and then Enter (Remove). The
Remove HIM confirmation screen appears.
2. Press Enter to confirm that you want to remove
the HIM.
3. Disconnect the HIM from the drive.
To install HIM
…
1. Connect the HIM cable to the drive (DPI Port 4).
See
.
ALT
+
Remove Op Intrfc:
Press Enter to
Disconnect Op Intrfc?
(Port 1 Control)
Advertising