Rockwell Automation LPM20 Liquid-Cooled AC Drive with High Performance Drive Control - Manual (Page 3)

Summary of Changes
The information below summarizes the changes to this manual since the last
release (July 2005):
The information below summarizes the changes to this manual since the last
release (January 2005):
Description of Changes Page
In Table 1.A, changed column heading from “Output Current at 2 kHz (Amps)” to “Output
Current at 4 kHz (Amps).” Changed the last sentence in footnote 2 from “…also capable of
running at 3 kHz or 4 kHz…” to “…also capable of running at 2 kHz or 3 kHz.” 1-1
Changed Table 3.A columns and information. 3-7
Deleted Table 3.B, and added replacement fuses subheading and reference to the drive
wiring diagram. 3-7
In the“Control” category specifications section for the “Carrier Frequency,” changed the
statement “Drive rating based on 2 kHz” to “Drive rating based on 4 kHz.” A-2
Description of Changes Page
Deleted Chapter 3 - Programming and Parameters. The active converter information
formerly contained in Chapter 3 is now contained in the PowerFlex 700 Active Converter
Power Module User Manual (Publication No. PFLEX-UM002…), which is referenced in the
Preface. P-1
Changed the following catalog string information:
• In Digits 4 through 7 (Input Voltage & Output Current Rating), deleted Cat. Code D405.
Also removed all “405A” drive information from Table 1.A, Table 1.B, Table 1.C, Table
3A, Table 3B, and the VFD Power Module Table on page C-11.
• In Digit 12 (Input Filter Items), deleted Cat. Code C.
P-5
Added a reference to the PowerFlex 700 Active Converter Power Module User Manual
(Publication No. PFLEX-UM002…) for more information about active converter
communication. 1-33
Added a reference to the PowerFlex 700 Active Converter Power Module User Manual
(Publication No. PFLEX-UM002…) for more information about wiring the active converter
control board I/O terminals. 1-34
Re-numbered Chapter 4 - Troubleshooting to be Chapter 3. Chapter 3
Added a reference to the PowerFlex 700 Active Converter Power Module User Manual
(Publication No. PFLEX-UM002…) for active converter fault descriptions and related
troubleshooting information. 3-3
In Table 3.B, changed replacement Voltage Feedback Resistor Assembly, 460 V kit
number from “180924-A03” to “180923-A03.” —