Ethernet link leds link 1 and 2 – Rockwell Automation 842E CM Integrated Motion Encoder on EtherNet/IP User Manual
Page 48
48
Rockwell Automation Publication 842E-UM002A-EN-P - November 2013
Chapter 6
Diagnostics and Troubleshooting
Ethernet Link LEDs Link 1 and 2
The Ethernet link LEDs, Link 1 and Link 2, display the status of the physical
connection on the Ethernet interface.
Net LED
Description
OFF
No power/IP connection
Green Connected
Green flashing
No connection
Red
Major fault
Red flashing
Minor fault / Duplicate IP
Mod LED
Description
OFF
No power
Green
Running
Green flashing
Standby
Red
Major fault
Red flashing
Minor fault
Green/red flashing
Self-test
XS (Axis) LED
Description
OFF
No power
Green
Running
Green flashing
Standby
Red flashing
Minor fault or Firmware updating
Amber
Major fault
Amber flashing
Self-test at power-on
Link 1 and Link 2 LEDs
Description
OFF
No power/IP address
Green
LINK
Green flashing
Port activity
Amber Port
disabled
Amber flashing
Collision