Appxb-installadd-onprofile, Installing the add-on profile – Rockwell Automation 842E CM Integrated Motion Encoder on EtherNet/IP User Manual
Page 57
Rockwell Automation Publication 842E-UM002A-EN-P - November 2013
57
Appendix
B
Installing the Add-on Profile
Introduction
This appendix shows how to install the add-on profile (AOP) of the
encoder with the RSLogix 5000 program. Add-on profiles are files that
users add to their Rockwell Automation library. These files contain the
pertinent information for configuring a device that will be added to the
Rockwell Automation network.
The add-on profile simplifies the configuration of devices because it
presents the necessary fields in an organized fashion, which allows users
to set up and configure their systems in a quick and efficient manner.
The add-on profile is a folder containing numerous files for the device. It
comes as an installation package.
Performing the installation
Install the add-on profile following the on-screen instructions.
1. In the file explorer, locate the directory where the installation files
were extracted.
2. Click MPSetup.exe.
3. Extract the zip file to a local directory on your computer.
4. Double-click on MPSetup.exe to begin the installation.