Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions - Manual (Page 10)

10 Powermonitor 3000 Master Module
Publication 1404-IN007F-EN-P - November 2009
Catalog Number Explanation
The Powermonitor 3000 unit has the following catalog number possibilities.
1404 - M4 05 A - ENT - 02
Bulletin Number
1404 = Power
Monitoring and
Management
Products
Type of Device
M4 = Master Module with
three-phase metering,
setpoints, I/O, and data
logging.
M5 = M4 functionality,
firmware upgradeable to an
M6 or M8.
M6 = M5 functionality plus
oscillography, sag/swell
detection, harmonics 1…41
measurement, additional
setpoints and logging,
firmware upgradeable to M8.
M8 = M6 functionality plus
transient capture and
analysis, harmonics
measurement up to 63rd,
Transducer and Energy Meter
modes.
Current Inputs
05 = 5 A
Power Supply
A =
120…240V AC
50…60 Hz or
125…250V DC
B = 24V DC
000 = None
232 = RS-232 Serial
DNT = DeviceNet
RIO = Remote I/O
ENT = EtherNet/IP
CNT = ControlNet
Communication
Options (1)
Revenue
Accuracy Class
Blank = Class 1 or
Class 0.5
02 = Class 0.2
(1)
In addition to Native RS-485 port.