Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions - Manual (Page 59)

Powermonitor 3000 Master Module 59
Publication 1404-IN007F-EN-P - November 2009
Product Approvals
Powermonitor 3000 units have the following approvals and certifications.
EtherNet/IP Conformance Testing
All products equipped with an EtherNet/IP communication port bear the mark shown
below. This mark indicates the power monitor has been tested at an Open Device Vendor
Association (ODVA) independent test lab and has passed the EtherNet/IP conformance test.
This test provides a level of assurance that the power monitor interoperates with other
conformance tested EtherNet/IP devices (including devices from other vendors). Two
representative devices from the Powermonitor 3000 EtherNet/IP family of devices, the
1404-M405A-ENT/B and the 1404-M805A-ENT/B modules, have been tested by ODVA
using EtherNet/IP Conformance Test version A2.8. The ODVA website
(
http://www.odva.org ) maintains a list of products that have passed the conformance test at
one of their test labs.
ControlNet Conformance Testing
All products equipped with a ControlNet communication port bear the mark shown below.
This mark indicates the power monitor has been tested at a ControlNet International (CI)
independent test lab and has passed the ControlNet conformance test. This test provides a
level of assurance that the power monitor interoperates with other conformance tested
ControlNet devices (including devices from other vendors). Two representative device from
the Powermonitor 3000 ControlNet family of devices, the 1404-M405A-CNT/A and the
1404-M805A-CNT/A modules, have been tested by CI using ControlNet Conformance Test
version 12. The CI website (
http://www.ControlNet.org ) maintains a list of products that
have passed the conformance test at one of their test labs.
UL/CUL
UL 508 listed, File E96956, for Industrial Control Equipment and CUL Certified.