Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions User Manual
Page 46
46 Powermonitor 3000 Master Module
Publication 1404-IN007F-EN-P - November 2009
Refer to the following documentation for ControlNet network wiring requirements and
general ControlNet information:
• ControlNet Coax Media Planning and Installation Guide,
publication
• ControlNet Coax Tap Installation Instructions, publicatio
Connecting a Programming Terminal to the Network by Using a 1786-CP Cable
To connect a programming terminal to the network using a 1786-CP cable, you have the
following options:
• Using a 1784-KTC, 1784-KTCx, or 1784-PCC communication card and a 1786-CP
cable
• Using a 1770-KFC communication interface, a serial or parallel connection, and a
1786-CP cable
1786-CP Cable
1784-KTC, KTCx,
PCIC, or PCC Card
ControlNet Link
Powermonitor 3000 Device
1786-CP
ControlNet Link
Cable
1770-KFC
Serial or Parallel
Connections
Powermonitor 3000 Device