Quick start guidelines – Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions User Manual
Page 11
Powermonitor 3000 Master Module 11
Publication 1404-IN007F-EN-P - November 2009
Quick Start Guidelines
The Powermonitor 3000 unit may be used in many electric power monitoring and control
systems. Whether your power monitor is a complete power and energy monitor or a
component in a plant- or enterprise-wide energy management system, there are a few basic
steps to follow to make your unit operational.
1. Install your Powermonitor 3000 master module within a suitable enclosure.
Refer to Install the Powermonitor 3000 Unit on
2. Install your optional display module.
Refer to the Bulletin 1404 Display Module Installation Instructions, publication
3. Determine your wiring mode and install wiring between the power monitor and your
power system.
4. Connect control power wiring, preferably from a separate source of control power.
5. If used, connect wiring to the status inputs, Form C control relay, and KYZ solid-state
outputs.
Refer to Wiring and Connecting the Power Monitor on
.
6. Configure the potential transformer (PT) and current transformer (CT) ratios to
match those used in your power system connections.
7. Configure the Voltage mode of the power monitor to match your power system
configuration.
8. Configure power monitor communication.
This step varies depending upon the communication option you have selected.
9. Configure the power monitor date and time.
10. Configure other optional performance features, such as setpoint control and data
logging.
Refer to the Powermonitor 3000 User Manual, publication
, for complete
information on configuring and operating your power monitor.